Tag Archives: ucurrent gold

20161009_021036s

Low power weather station with BME280 and Moteino

A few weeks ago I wrote about my new door monitor. It was the first step towards migrating my XBee based wireless sensors network to RFM69 radios using Moteino platform by LowPowerLab. I was truly impressed by the low power consumption so I committed myself to keep on working with them.

Coincidentally Felix Russo, the guy behind LowPowerLab, released the new version of it’s Weather Shield for Moteino. So it was time to update (or completely revamp) my trusty Arduino FIO based weather station… and last week I received a parcel from LowPowerLab with a pair of shields to play with: the new WeatherShield R2 and the PowerShield R3. They are both compatible with the Moteino (off course).

Moteino PowerShield and WeatherShield

From left to right: PowerShield R3, Moteino and the new WeatherShield R2

Continue reading

20160826_132916x

Moteino Door Monitor

Some days ago I posted about the RFM69 to MQTT gateway based on the ESP8266 I am working on. Over these days I’ve been fine tuning the gateway at the same time I was migrating one of my home sensors to Moteino: the Door Monitor. The previous version was based on an XBee radio and has been on duty for almost 3 years and a half. Real life battery time has been around 3 months for a CR2032 coin cell, which is not bad at all, but still…

Aside from using a Moteino and a RFM69 868MHz radio instead of the XBee, I have reduced the components list by moving hardware logic to software logic. This means using sleeping capabilities of both the ATMega328 and the RFM69 and coding in a clever way to reduce awake time.

Continue reading