Tag Archives: telegram

screenshot-at-2018-10-29-14-21-19

Monitor your TTN gateways with Node-RED

This time I’d like to write a quick post about a small project we’ve been working on at the The Things Network community in Barcelona (@ttncat). We were worried about the monitoring of the gateways we have deployed, both as a community but also as individuals. Some of our partners have also deployed their own gateways and they are part of the community.

dcnephfw4aennxv

So how do we get (almost) real-time notifications of incidences in the local TTN network? We want to be able to track them as soon as possible and open the proper ticket in our management system to solve them if the solution is in our hands or notify the entity responsible for the gateway.

Continue reading

screenshot_2018-09-23-17-28-33

Useful notifications from your home appliances using Node-RED

Some time ago I worked on a home project to get a notification when my washing machine had done its job based on monitoring its power consumption. There was a good reason for that, the machine was outside the house and I had already forgotten about the laundry several times. And when that happens your only option is to wash it again, because it really smells musty…

Monitoring your appliances

Use ESPurna 🙂

OK, there are different ways to get the info about power consumption. But since we want to be able to process the data ourselves most commercial products won’t be suitable unless we modify it.

Alternatively, those that use radio communication to send data from the meter to the base station might be suitable for a man-in-the-middle hack. For instance, if you own an Efergy power meter you must know you can sniff the data it sends using a simple RTL-SDR dongle.

But for most cases, your best chance is to get your hands on a commercial product with an ESP8266 chip in it and change the firmware to suit your needs. You can write your own or use an existing firmware like ESPurna, that already supports a bunch of power metering smart switches.

What info do you need?

The idea is to report (via MQTT) power data from each individual appliance very minute. You can then use Node-RED along with InfluxDB and Grafana (or Graphite) to receive, persist and graph your data like in the image below.

grafana-consum

Continue reading