Tag Archives: s20 smart socket

20160820_102049x

New firmware for the Slampher

Some weeks ago I received a parcel from Itead. Previously, I had written about the Sonoff and they were kind enough to send me two more of their home automation products for me to review: the S20 Smart Socket I wrote about two weeks ago and the Slampher.

Slampher box

The Slampher comes in a simple cardboard box with no documentation at all… just visit their wiki!

The Slampher is kind of a Sonoff RF that sits before any light bulb with an E27 screw. As you can see in the header pic of this post it adds quite some length to the group. It’s a bit bulky and might not fit in every lamp. Off course the board layout is different from the Sonoff and it uses a JST131U-800D 1A triac instead of a relay to switch the bulb. Aside from that they are equivalent.

Continue reading

Sonoff TH 10A/16A

ITead’s Evolution

I was not the first to arrive at the party but since I discovered the ESP8266 I’ve been enjoying it. Then I stumbled upon the Sonoff and dude was I amazed. They are cheap and so very hackable you cannot help buying them, tear them open and customize them.

Sure they are not CE or UL compliant, yet. My previous post about adding a custom RF module to a Sonoff HT got some visibility as it was published at hackaday.com. Most of the commentors there  where concerned about safety measures in the device. The truth is that early Sonoffs looked more like products for the DIY market, not for end customers.

But ITead’s home automation product line is evolving quite fast. It all started with several Sonoff models (with or without RF, with or without temperature and humidity sensors, with or without AC/DC transformer) and the Slampher I’ll be reviewing it soon.

Continue reading