Tag Archives: power monitor


Connected power meter

A few weeks ago a user came with a request to add support in ESPurna to a power meter that had been hacked by Karl Hagström. It is a very cheap chinese power meter with plenty of room on the inside, enough to house an ESP8266 module and a DC/DC power supply and the main IC protocol had been reverse engeneered. There even was a repository by the Harringay Maker Space with sample code for an arduino compatible platform.

I found it really interesting so I jumped in and ordered two of them (for 25,20 euros in total). Unfortunately the seller I bought it from has ran out of them. But you can still find them on the usual market places, like these ones [Ebay] or (also with non-EU variants) these ones [Aliexpress].

When I received them I quicky unscrewed the enclosure of one of them and… wow, it looked slightly different than that on Karl’s post but also different from the one the people at Harringay Maker Space had worked with.

p1240281s p1240279s

I went back and forth and I noticed the hack was almost 2 years old and the board was clearly different: different version (unlabelled on Karl’s pictures, version 2014-04-28 on Harringay’s power meter and 2016-12-18 on mine), different board layout with a different connector between the power meter board and the display (7 wires on theirs, 6 on mine). But the most important difference was the main power meter IC. Karl had reverse engineered the ECH1560 on his power meter, a 24pin SOP package (on the back on his device, on the front in Herringay’s power meter). Mine was only 16pin…

p1240274sI had to decipher the IC mark using parts from both devices since the manufacturer had crossed out the marks (they don’t want us to hack it or what?). Finally my best guess was V9261F. I quicky googled it and… bingo!

Continue reading


ESPurna smart socket

After a busy month I decided to spend some energy on doing hardware instead of software and the result was the ESPurna board I posted about just yesterday. The goal was to have a device based on the ESP8266 I could fit into my house wall gangs, with an SPDT relay to work with multi-way switches and power monitoring using the same IC the Sonoff POW uses: the HLW8012.

As a side project today I’ve been searching on the box of the TODO projects and I have rescued a KEMO STG15 [Ebay] plug housing with socket. These sockets are somewhat expensive and really bulky but the good thing is that there is quite some room to fit some electronics inside, but not a Sonoff board, too big.

But, what about an ESPurna board?


Continue reading