A few months ago I wrote about the Sonoff SC sensor hub by Itead Studio. It’s a device with a Sharp GP2Y1010AU0F [Aliexpress] dust sensor, a DHT11 humidity and temperature sensor, an LDR as light sensor and a mic. The sensors are driven by an ATMega328P microcontroller but there is also an ESP8266 on board for WiFi communication, a pretty standard set up when you have several sensors and the ESP8266 GPIOs are just not enough.
On the first post I already did a small mod to replace the DHT11 humidity and temperature sensor with a more accurate and pin compatible DHT22. Since then, several readers have contributed with code and ideas. My progress implementing and testing them is slow, so I though about writing a first post about some modifications I (and others) have done to the device.
So this is a work in progress post. At the moment, all the code for these modifications is in the dev branch of the repository.
This custom Sonoff SC firmware is released as free open software and can be checked out at my SonoffSC repository on Github.
Tindie is a great place to find uncommon electronic components or weird/interesting boards. I use to stroll around it’s products to basically see what’s new. It’s like Kickstarted but for real. One such uncommon and new electronic components is the Panasonic’s Grid_EYE AMG88 [datasheet, pdf] infrared sensor. And I first learn about it through Peasky Products breakout board at Tindie.
And if you have been reading me lately you might know I’m going through my own LED fever. My latests “sliced” projects are not the only ones I’m working on at the moment. So it was not surprise my brain immediately linked an 8×8 IR array with an 8×8 LED matrix display. You see?
So what do you have if you throw in a box an IR sensor and a LED matrix, add a small microcontroller, a LiIon battery and a charger and a step-up to power the LEDs? Well, in my case the outcome has been a bulky but nice camera (albeit a very poor resolution one).
I know there are commercially available IR Cameras like this one [Ebay]. They have 300k pixels and can overlay a normal image over the IR image and other fancy stuff, but they are also more expensive (around 200€ the best deal) and waaaaaay less fun to build.
Last December Itead Studio updated their Home Automation product line with a new and different product. The main difference is that it doesn’t have a relay and it’s mainly sensors and no actuator (if we don’t define a notifying LED as an actuator). The Sonoff SC is a sensor station that packs a DHT11 temperature and humidity sensor, a GM55 LDR, an electret microphone with an amplifier circuit and a Sharp GP2Y1010AU0F [Aliexpress] dust sensor in a fancy case that looks like it was originally meant for a speaker.
The device is packs an ESP8266 as expected and is compatible with the eWeLink app. But, such a collection of sensors, with 3 of them having analog interfaces, cannot be run from the single-ADC ESP8266 so Itead has thrown in a good old ATMega328P to drive the sensors and report the Espressif with the data.