Tag Archives: electrodragon

img_20170206_214354x

Smart wall switches and push buttons

One might think that one of the typical uses for a smart wireless switch (like Sonoff devices) is to be embedded behind a normal wall switch so it becomes a “smart” wall switch. It may seem obvious but it’s not that straight forward. There are several things that get in the middle.

  • Most (all?) the boards have momentary push buttons while wall switches are (normally) toggle switches
  • Most of the available boards in the market are SPST, even those with SPDT relays often only provide terminals for COM and NO, not NC. I only have one one-throw switch at home, all the others are one-way-two-throw and are being used as part of a multi-way switch.

First problem can be easily solved in code. Instead of detecting one edge of the button signal (usually the rising edge since most push buttons are configured with pull-ups) you can detect both edges.

Second problem is harder since it depends on the hard-ware (ehem). But there are a few boards out there with SPDT relays like the Itead 1CH board I recently covered, the e_Goto Wifi Relay Switch Module [Aliexpress] or the Your Cee ESP8266 5V WiFi Relay Module [Aliexpress]. There are also two-relay boards you can use for a multiway switch by syncing the relays in opposition mode using ESPurna firmware for instance (one and only one relay on). The Electrodragon ESP Relay board is one such boards. Another one is the Sonoff Dual.

20161207_003729s

The Electrodragon ESP Relay board and Itead’s Sonoff Dual

Continue reading

20161207_003729s

ESP8266 Multi-relay boards: Sonoff Dual and Electrodragon

 

November was a busy month and the Sonoff Dual that IteadStudio kindly sent me to review was bored in a box waiting for some free time. But it was just fair that another board that has been waiting in the boards-to-review box for longer had it’s chance to have some fresh air too. So here we have the Itead Studio Sonoff Dual and the Electrodragon ESP Relay Board face to face.

Continue reading

20161005_005107s

Sonoff TH10 & TH16: sensors, displays, actuators,…

Itead Studio keep on creating interesting products for the hacker community. A few weeks ago a new version of the already classic Sonoff TH came to life. This new version comes in two flavours: the Sonoff TH10 and TH16 and you can buy them at Aliexpress: Sonoff TH 10A/16A Temperature And Humidity Monitoring WiFi Smart Switch.

In this article I will briefly talk about what’s new in this device to quickly go to explore one of those novelties: it’s external interface.

Continue reading