Tag Archives: 3d print

20170327_233139s

The ESPurna board, a smart wall switch with power monitoring

If you have read me, you might know I have a firmware for ESP8266-based smart switches called ESPurna. The firmware integrates with Alexa, Domoticz, Home Assistant and about any other service that supports MQTT or HTTP REST APIs. It supports a variety of devices, including almost the whole Sonoff family by Itead Studio, but also some other commercially available boards and light bulbs, and open source hardware projects as well.

But sometimes you just don’t find the proper hardware for your specific case. Maybe it doesn’t expose enough GPIOs, maybe it’s short of analog ports, maybe you need a double-throw relay,… Sometimes we manage to work around these limitations of the hardware adding peripherals or using a thin iron tip. But other times the problem is that it just doesn’t fit.

And size was the main reason I started creating my own smart switch board.

Continue reading